910 PM Marble/Granite Cleaner - Polished

Diedrich’s 910 PM Polished Marble/Granite Cleaner is a non-acidic cleaning product designed for cleaning and restoring older masonry surfaces.

• 910 PM loosens and solubilizes surface dirt, carbon build-up and other atmospheric stains, allowing a simple cold water rinse to remove unsightly stains from the masonry surface
• Normally will not affect polished or glazed surfaces and other surfaces where acidic cleaners cannot be used
• Ideal for interior and exterior applications

FOR SURFACE/MASONRY TYPES: Polished Marble, Granite, Terra Cotta, and Glazed Tile

NOTE: Do NOT use on polished black marble, painted surfaces, or wood

SIZES: 1, 5 & 55 Gallons

Polished Marble/Granite Cleaner Application

• Pre-wet surface with a wet sponge or water spray.
• Apply 910 PM with a soft bristled nylon brush.
• Allow to dwell for 5 to 15 minutes and re-apply cleaner with gentle scrubbing.
• Rinse cleaner with a wet NATURAL sponge.
• Suggested Dilution Rates
  for 910 PM Polished Marble/Granite Cleaner

Project Materials/Condition	Dilution Rate is 1 Part Product To:
Polished Marble Surfaces	Use in concentrate during initial cleaning test. If effective, test to determine dilution rate.

• For detailed instructions, download the Technical Data Sheet for this product
• Typical Coverage Rates: 75-100 sq. ft. per gal. (undiluted - coverage increases with dilution)