ENVIRESTORE 100™ GEL

Another perfect product for the environmentally conscious architect and historic preservationist who want to eliminate harsh acids.

• Viscous solution that will not evaporate or soak into the wall allowing for longer dwell times than the original ENVIRESTORE 100
• Should not be diluted, apply full strength to a pre-wet surface, and keep wet at all times
• Coverage rate is 100 sq.ft. per gallon
• Citric based gentle restoration cleaner – safer, environmentally friendly, now made more effective and blended slightly stronger to take on a wider variety of surfaces
• ENVIRESTORE 100™ GEL depends on the action of citric and phosphoric acid for its results rather than harsh mineral acids, making it a milder product that poses fewer hazards to workers and the environment
• The product will not over-clean brick and stone
• Product is ideal for maintenance cleaning of dirt streaks and stains in strip malls, commercial centers, and home DIY use.

FOR MASONRY TYPES:
Brick, Sandstone, Unpolished Granite, and Terra Ccotta

SIZES: 1, 5 & 55 Gallons

ENVIRESTORE Application

• Apply with a low-pressure corrosive-resistant sprayer, the Diedrich Acid Express pump unit, or with a soft densely fibered synthetic brush.
• Apply full strength to a pre-wet surface and keep the surface wet at all times. Two full strength applications may be required on heavy carbon and soiled surfaces.
• Apply the first coast and allow a 5 minute dwell time, apply the second coat and allow another 5 minute dwell time.
• Rinse off with high pressure water (minimum of 500 psi), rinse until sudsing ceases. Work from bottom to top.
• When applying outside occupied buildings, all window, air intakes and exterior air conditioning and/or intake vents should be covered and shut down during and for 30 minutes following application.
• Further applications may be required to achieve desired results.
• Suggested Dilution Rates for ENVIRESTORE 100™ GEL

PRODUCT SHOULD NOT BE DILUTED

• Download the Technical Data Sheet for this product for detailed instructions
• Typical Coverage Rates: 100 sq. ft. per gal.