960 Heavy Duty Concrete Cleaner

960 is formulated for the removal of dirt, rust, retarders and mud stains from rough stucco and pre-cast finishes, concrete with a heavily textured surface and sand-blasted surfaces.

• Ideal for the cleaning and etching of older concrete.
• Can be used to clean exposed aggregate and concrete block
• It can also be used as an economical way to correct color and texture irregularities
• When used on colored, smooth white or grey concrete, use highly diluted
• Also works as a limestone restoration cleaner

FOR SURFACE/MASONRY TYPES:

• Concrete (Rough Stucco, Pre-Cast, Heavily Textured Surface and Sand-Blasted Surfaces), Exposed Aggregate, and Concrete Block
  
• Also for Cleaning And Etching Of Older Concrete
• Also works as a limestone restoration cleaner

SIZES: 1, 5 & 55 Gallons

Heavy Duty Concrete Cleaner Application

• Prewet surface to be cleaned.
• Apply diluted 960 with a low pressure (40-50 psi) airless sprayer, brush or roller.
  Allow 2 to 3 minute dwell time; DO NOT ALLOW SOLLUTION TO DRY ON SURFACE.
• Rinse with a pressure washer.
• Neutralize interior surfaces with a mix of 1 gallon water to 2 oz. ammonia and rinse again.
• Suggested Dilution Rates for 960 Heavy Duty Concrete Cleaner

Project Materials/Condition	Dilution Rate is 1 Part Product To:
Light Exposed Aggregate	6 parts water
Heavy Exposed Aggregate	2 parts water
Form Finished Concrete	6-8 parts water
Concrete Block (weathering or etching)	2 parts water
Concrete Block (removal of mortar stains, etc.)	6 parts water

• For detailed instructions, download the Technical Data Sheet for this product
• Typical Coverage Rates: 100-150 sq. ft. per gal. (coverage increases with dilution)