Restoring the Past. Preserving the Future.
m menu image  m home

505 Special Coatings Stripper


505 Special Coatings Stripper DOCUMENTS & DOWNLOADS


505 Special Coatings Stripper is an opaque, non-flammable, water soluble, non-damaging paint remover with a viscous, heavy body designed to cling to vertical surfaces.

  • Quick action raises the coating in 10 to 20 minutes for easy water wash-off.
  • 505's thixotropic solvent can be scraped and sponged clean on interiors.
  • A special added inhibitor prevents premature dry-out.
  • The product contains no caustic alkali, acid or benzol.
  • "M-PYROL" resin solvent, a new mega-strength catalyst, is added for extra solvency on hard-to-lift complex paint resins such as epoxies, urethanes, rubber-base, elastomerics, enamels, etc.
  • Recommended for stripping paint from wood, as it does not require neutralization and will not raise or discolor wood grain

NOTE: 505 is a part of the Diedrich Anti-Graffiti System

SIZES: 1, 5 & 55 Gallons

Special Coatings Stripper Application

  • Apply a heavy coat in one direction as you would paint; do not scrub in multiple directions.
  • Allow to dwell 10 to 20 minutes and remove the old finish before it dries.
  • For multi-coat removal apply a ΒΌ” thick coat with stainless steel chemical resistant sprayer, putty or broad knife.
  • Dwell 1 to 4 hours.
  • Protect ground with sheets covered in hay and scrape paint off surface.
  • Allow to sit 24 hrs. and dispose per local regulations.
  • Suggested Dilution Rates for 505 Special Coatings Stripper
  • Download the Technical Data Sheet for this product (right column) for detailed instructions
  • Typical Coverage Rates: 50-100 sq. ft. per gal.

For the containment and neutralization of this and other Diedrich products: Neutra Soak, a dry absorbent product environmental protection system.

Copyright © 2018 Diedrich Technologies

Privacy Policy | Safe Harbor