Architectural & Specialty Masonry Cleaner

Ideal for use on architectural block and split face block, Diedrich's Specialty Architectural Masonry Cleaner is specially formulated for the effective removal of construction dirt and atmospheric staining.

• Removes mortar smears, rust and mud stains, efflorescence and atmospheric dirt without affecting the texture of the surface
• Specialty Masonry Cleaner enhances colors and brightens white substrates and exposed aggregate

FOR MASONRY TYPES:
Architectural Block and Split Face Block(Works well on custom masonry, architectural and pigmented concrete surfaces, and colored mortar - contact us for details)

SIZES: 1, 5 & 55 Gallons

Architectural & Specialty Masonry Cleaner

• Thoroughly pre-wet entire surface with water to prevent streaking and apply product by brush, roller, or low pressure (40-50 psi) airless sprayer.
• Allow to dwell until stains disappear (2 to 5 minutes).
• Reapply cleaner and rinse with a pressure washer starting from bottom to top.
• Protect all non-masonry surfaces when used indoors and neutralize surface with a mix of 1 gallon water to 2 oz. ammonia and rinse again.
• Suggested Dilution Rates
  for Specialty Architectural Masonry Cleaner

Project Materials/Condition	Dilution Rate is 1 Part Product To:
Concrete and Clay Block	4 parts water
Hard Burned Pink, Salmon & Tan Brick	6 parts water
Exposed Aggregate Concrete	6 parts water
Structural Tile (Unglazed)	6 parts water
Red Brick	6 to 8 parts water
Limestone, Sandstone, Ohio Bluestone & Other Porous Stones	8 parts water (if metallic stains are present prior to testing or appear afterwards, use 202V Vana-Stop)

• Download the Technical Data Sheet for this product for detailed instructions
• Typical Coverage Rates:150 to 200 sq. ft. per gallon on smooth surfaces. Coverage on highly textured surfaces may be as low as 50 sq. ft./gal.