101G Granite, Terra Cotta and Brick Restoration Cleaner

This product has been discontinued.

Please consider ENVIRESTORE 100, an environmentally conscious restoration cleaning product.

The unique anti-stain formulation of 101G restoration cleaner inhibits the "rust" discoloration and the common yellowing caused by moisture in granite.

• Guarantees a natural white appearance and crystal highlight of the stone surface
• Meets preservation guidelines for detergent masonry cleaners
• Recommended for easy-to-clean face brick, glazed tile, granite and terra cotta
• NOTE: Do not use on polished granite or marble stone
• Clear aqueous liquid with a pH of 1.0 (5.4 @ 10:1 dilution).

*For Professional Contractor Use Only.

FOR MASONRY TYPES:
Easy-to-clean face brick, glazed tile, granite and terra cotta.

SIZES: 1, 5 & 55 Gallons

Granite, Terra Cotta and Brick Cleaner Application

• Thoroughly prewet wall with water to avoid streaking and bleaching.
• Apply diluted 101G with a dense, soft masonry brush, roll, or low pressure (40-50 psi) airless sprayer.
• Allow to dwell for 2 to 10 minutes depending on dirt levels.
• Rinse with a pressure washer starting at the lowest point and working up.
• Suggested Dilution Rates for 101G Granite, Terra Cotta and Brick Cleaner

Project Materials/Condition	Dilution Rate is 1 Part Product To:
Granite, Terra Cotta and Brick	Up to 10 parts water, depending on degree of accumulated dirt and method of application and rinse

• Download the Technical Data Sheet for this product for detailed instructions
• Typical Coverage Rates: 150-200 sq. ft. per gal.

For the containment and neutralization of this and other Diedrich products: Neutra Soak, a dry absorbent product environmental protection system