Paint and Coating Removers
606 Extra Thick Multi-Layer Paint Remover is designed to
dissolve and remove oil and lead based paints, latex paints and
varnishes from exterior surfaces.
Advantages:
- Specially thickened potassium hydroxide solutions and are biodegradable
and water soluble
- A thick coat can dwell for up to 24 hours depending on the layers
and types of paint
Limitations:
- Product should not be used when the temperature is less than
50º F
- Not for use on wood furniture or finished wood surfaces
Typical Coverage Rates:
*Note: This product should not be diluted
1 gallon of product will clean approximately 50-100 sq. feet of
surface
505 Special Coatings Stripper is an opaque, non-flammable,
water-soluble paint remover with a heavy body designed to cling
to vertical surfaces.
Advantages:
- Quick action formula raises the coating in 10-20 minutes for
easy water wash off.
- Added inhibitor prevents premature dry-out
- Does not require neutralization and will not raise or discolor
wood
- A new catalyst "M-PYROL" resin solvent has been added
to remove hard to lift paint resins such as epoxies, urethanes,
rubber-base, elastomerics, enamels etc.
Limitations:
- Applying 505 by brush could result in the product being applied
too thin.
- A thin application could result in premature dry out in the
summer sun.
Typical Coverage Rates:
*Note: This product should not be diluted
1 gallon of product will clean approximately 50-100 sq. feet of
surface
404 Rip Strip (The Dry Strip Method) is a film forming,
drip strip system for easy lead paint abatement and collection.
Advantages:
- Attached paint pull off system strips multiple coats of paint
with one application
- Environmentally safe: no dangerous lead dust or fumes are emitted
- Works best on brick masonry and cast iron
- Saves time, labor, material and money
Typical Coverage Rates:
1 gallon of product will clean approximately 25-50 sq. feet of
surface
|