333 Omegaseal Water Repellent

333 Omegaseal Water Repellent is a split face block sealer with heavy-duty solids and provides hydrophobic protection to masonry surfaces through the formation of a semi-permeable membrane.

Advantages:

• The flexible membrane remains intact through thermal movement of masonry, rejects water in the solid state and allows for moisture vapor transmission - it breathes.
• Can be applied year round at 20ºF and above
• A unique blend of silicone polymers provides maximum resistance to ultra-violet light and acid rain
• Functions very well for graffiti protection

Limitations:

• Can not be applied to wet, damp or dirty surfaces
• Not suitable for any polished masonry surface

Product selection:

1. 333-S 6%: Use for Clay brick, Concrete Brick, Pre-cast & Site-cast Concrete, Stucco and Most Natural Stone.  Covers 100-200 sq. ft/gal
2. 333-E 10%: Use for horizontal Concrete, Interlocking Pavers, Concrete Block, Highly Porous Natural Stone, L&S Stone.  Covers 75-150 sq. ft/gal
3. 333-S 6%: Use for Clay brick, Concrete Brick, Pre-cast & Site-cast Concrete, Stucco and Most Natural Stone.  Covers 100-200 sq. ft/gal
4. 333-A 15%: Use for Hollow Core Split Fluted block, Heavy Duty Weight block (2 applications are required for either).  Covers 50-100 sq. ft/gal - 2 coats required minimum for warranty consideration
5. 333-L 20%: Use for Extremely Porous Block (Hollow Core Split Faced) with or without integral waterproofing.  Covers 50-100 sq. ft/gal - 2 coats required minimum for warranty consideration

MSDS
333 Omegaseal Water Repellent

Tech Data Sheet
333 Omegaseal Water Repellent