300-C Water-Base Siloxane Concentrate Water Repellent

300-C Water-Base Siloxane Concentrate Water Repellent is VOC compliant and specially formulated for use on pre-cast and site cast concrete, clay and concrete masonry, stucco, and sandstone where surface darkening is not acceptable.

Advantages:

• Reduces bonding of airborne dirt and hydrocarbons as well as damage caused by the freeze/thaw cycle
• Provides protection against efflorescence
• Shows excellent resistance to ultraviolet rays and chlorine ions
• Exceeds requirements of NCHRP244 & meets SSW 110C Federal Specification and ASTM E514

Limitations:

• Not recommended for polished or unpolished marble, travertine, limestone, polished granite, gypsum, plaster or synthetic resin paint
• Temperature must be 40ºF or higher at time of application

Suggested Dilution Rates

Diluted Coverage Rates:

Concrete:

• Brick & Tile 600-850 sq. ft
• Pre-cast Panels 1500-2000 sq. ft
• Pavers 600-850 sq. ft
• Cast-in-place 600-850 sq. ft

Fired Clay:

• Brick Pavers, Terra Cotta & Tile 1250-1750 sq. ft

Granite:

• Unpolished 2000-4000 sq. ft
• Sandstone 750-1000 sq. ft
• Slate 2000-4000 sq. ft

MSDS
300-C Water Base Siloxane Concentrate Water Repellent

Tech Data Sheet
300-C Water Base Siloxane Concentrate Water Repellent