Products

200 Lime-Solv

200 Lime-Solv is a blend of acids, wetting agents and inhibitors combined to efficiently clean residual mortar and day to day soiling and staining that occurs on job sites.

Advantages:

Most efficient and economical on red and dark colored brick
Easily removes mortar residue with little or no agitation
Will not discolor or damage masonry surfaces and is more controllable than muriatic acid

Limitations:

Not recommended for use on light colored brick, porous stone, large limestone areas or surfaces with metallic stains or discolorations. See product description for 202V Vana-Stop
Extra precaution should be taken when used on glazed substrates and colored mortar
Not effective in removing atmospheric grime and carbon or smoke and fire damage. See information of Diedrich Restoration Cleaners

Suggested Dilution Rates:

1 Part Product	To:
Concrete and Clay Block	4 parts water
Hard-burned Pink, Salmon & Tan Brick	6 parts water
Structural Tile (Unglazed)	6 parts water
Sandstone, Ohio Bluestone, Other Porous Stone	8 parts water (If metallic stains are present prior to testing or appear afterwards, do not use 200 Lim-Solv - use 202V Vana-Stop)
Specialty Pre-Faced Concrete Block & Tile	8 parts water
Smooth Finished Precast & Cast in Place Concrete	10 parts water
Polished Stone (Granite & Marble)	20 parts water (Product could etch stone; testing required)
Structural & Ceramic glazed Tile and Brick	10-12 parts water
Burnished Masonry	Refer to Diedrich 222 Cultured Stone & Burnished Masonry Clenzer
Metallic Stains/Discolorations	If metallic stains are present prior to testing or appear afterwards, do not use 200 Lim-Solv - use 202V Vana-Stop

Tech Data Sheet
200 Lime-Solv

New Construction

Restoration & Conservation

Specialty Cleaners

Protective Treatments

200 Lime-Solv